How To Configure And Reset D-Link Dwr-111 Router. To perform a factory reset, please follow the steps below. The unit will reboot on its own.
Link Tp Reset
Give it a moment to start up with a light indication. Simply plug it in to create an instant hotspot. With the unit on, place a paper clip into the hole on the back of the unit labeled reset. If you have not changed the default settings, the How to change ssid and password of the router? Using lte technology, you can achieve download speeds of up to 150 mbps and upload speeds of up to 50 mbps1. Hold paper clip down for 10 seconds and release. 2 reset button press this button with an unfolded paperclip and hold for ten seconds to reset the device. Connect the included power adapter to a wall socket and your router. This router is great for situations where an impromptu wireless network must be set up, or wherever conventional network access is unavailable.
How to change ssid and password of the router? Ensure that you have connected successfully to the router. If you have not changed the default settings, the With the unit on, place a paper clip into the hole on the back of the unit labeled reset. 2 reset button press this button with an unfolded paperclip and hold for ten seconds to reset the device. Open your web browser and type in the ip address of the router (192.168.0.1 by default). If you have changed the password and cannot remember it, you will need to reset the router to factory defaults. 2 wan led will be lit if an internet connection is established, and will blink when data is being transferred. Click the tools tab at the top, then click the system tab on the left pane. The power light on the front of the router will turn orange to indicate that the unit is restarting. The default ssid and password are printed on the bottom of your router.
